We do the screen printing ourselves. We specialise in printing on textiles (T-shirts, sweaters) and other promotional products that have a flat surface (notepads, paper bags, etc.) We can also print colour motifs with raster and colour gradients. This technique is suitable for larger quantities, as the cost of preparation is high. However, for larger quantities the cost of printing goes down, so this type of printing is very advantageous if you are ordering several T-shirts, sweaters, etc.
The print is soft to the touch, elastic and washable
Vibrant colours, pantone shades
Low price for larger orders
For smaller quantities, we use DTG printing, which is equally soft, elastic and washable.
We use Kornit Breeze printers, which are small and manoeuvrable. They print slowly, but at the same time allow us to quickly complete unique and small orders. The ink is eco-friendly and also suitable for baby clothes. We print in full colour, including colour gradients and fine raster. The durability of the print can be compared to screen printing.
Multicolour printing
Affordable price for small quantities
Printing on light and dark cotton products
Pantone shades are more difficult to define
The most durable print is on 100% cotton
Screen printing is more affordable for larger quantities
Screen printing is the best solution for smaller runs of textile products and when you need a special effect. Glitter, reflective or luminescent interleavers in different colours can be combined with traditional colours. Of course, it is also possible to print in colour with glitter overlays.
Available
Ideal for unique
Special effects
For vector graphics only
Not for large print runs
A little more maintenance intensive
Print in colour on a wide range of materials, from T-shirts, jumpers, caps, bags, umbrellas, jackets, bags and sports products.
Printing in colour
High durability
Affordable for small and large print runs
Slightly less eco-friendly due to the use of foil
Different colours of thread are used for embroidery, the number of colours for each embroidery is limited and the colour of the thread is chosen from the colours of thread available. Embroidery is an extremely durable branding method suitable for workwear. Most garments, bags and similar items can be embroidered - but you should be aware that there is always a rough surface (knots) on the underside of the embroidery.
Professional look
Durability
Durability
Limited number of thread colours available
Larger embroideries may be uncomfortable to wear
Price depends on the number of stitches - but so does the quality of the embroidery.
We sublimation print neckbands, as well as cups, puzzles, mouse pads, key chains, T-shirts and other products suitable for sublimation. These are products made of a special material or with a coating that can be sublimation printed.
Unlimited number of print colours
Printing of large areas
Fast production, ideal for printing unique gifts
No pantone matching
Products must be ready for sublimation printing and be able to withstand high temperatures (200°C)
Print only on light or white polyester
One of the most durable product marking or branding techniques that can be used on most wood and metal products. We do some laser engraving ourselves, but larger quantities are engraved for us by external contractors.
Persistent
We can also engrave unique
Exactly
It is not possible to choose the engraving colour (except for products that allow it)
We cannot engrave all materials
Engraving areas are limited (we cannot engrave to the edges)
Some products cannot be printed to a high quality, but you can use labels. We use durable PVC films that are digitally printed and cut.
Fast and cheap
Suitable for almost all products
Order labels for different products at the same time, you can stick them on yourself
The sticker is peelable
less prestigious than printing
Sticking requires some skill and time (especially for larger quantities)
PAD PRINTING
We outsource pad printing. We usually have our products printed by suppliers who know their products well, so that the printing is as good as possible. We also did our own pad printing a few years ago, so we know the technology well and we know how to prepare the files so that they are suitable for printing. We are happy to advise you.
Pad printing is the industrial printing of small logos up to 7 cm in up to 4 colours. We can only print full colour, not raster and colour gradients. This technique is used for printing promotional products made of metal, wood, plastic, leather and ceramics.
Pantone printing
For larger quantities
Cheap
For flat and smooth surfaces only
Small logos only
Durability depends on the product
Epoxy - DOMING - STICKERS
The sticker is digitally printed and epoxy resin is applied to give the sticker a 3D effect while protecting the sticker from scratches and fading.3D stickers are mainly used on products that already have a recessed surface prepared for them. Of course, they can be used on all flat surfaces.
A slightly different way of branding
printing in colour
3D effect
The sticker is less durable than a print
the sticker can be peeled off
for flat and smooth surfaces only
PRINT DO MUGS
A sophisticated technology for branding glass and ceramic products. Only spot colours can be printed, but printing in different colours is possible. Products printed in this way are machine washable.
Durable printing
Printing is possible on the entire product
Durable also for machine washing
only in pantone colours (no multicolour)
more expensive than conventional printing
longer delivery times
Sandblasting
Ceramic, glass and metal cups and bidons (bottles) can be decorated with sandblasting. The sandblasting is carried out for us by a supplier who has specialised in cup branding for decades. The products are of high quality, as are all the printing and engraving techniques ...
Permanent
Discreet and elegant
You can only choose the colour if the product allows it
small surface area - up to 40 cm2